+61754329890

admin@mgoboard.com.au

Product Testing Register

Given the issues with theft of and duplication of our test reports by scammers and competitors, MgO Corp will not allow copies of reports to be given out without official and legally binding NC & NC agreements being signed.

The following list is an official register of some of the independent testing that has been carried out on ResCom® Building Products.

Health Product Standards:

Asbestos Free

  • AS 4964-2004

VOC & TVOC

  • CA 01350 California State Specifications (14 day) Report available to view on request)
  • ISO 16000-3:2011 Part 3
  • ISO 16000-6:2011 Part 6
  • ISO 16000-9:2011 Part 9
  • ISO 16000-11:3011 Part 11

ResCom® Wall and Flooring Board has EW credit: Low emitting materials compliance under California Department of Health (CDDH) standards method v1.1-2010 using private office exposure scenario TVOC concentration level of _______ listed online at www.hpd-collaborative.org

The following is a list of the independent testing carried out on:

ResCom® 10mm, 12mm & 14mm Wall Board

ResCom® 16mm, 18mm & 20mm Flooring

 

  • EN 12467:2012+A1:2016 (E) Section: 5.4.4, Section: 5.4.5, Section: 5.4.6, Section: 5.5.2, Section: 5.5.3, Section: 5.5.5, Section: 7.4.1, Section: 7.3.2, Section: 7.3.3, Section: 7.3.4, Section: 7.3.6.
  • EN 317:1993
  • EN 13501-1:2007 + A1:2009
  • BS 476-5:1979
  • BS 476-6: 1989 + A1:2009
  • BS 476-7: 1997
  • BS 476-11: 1982
  • BS 476 Part 21
  • BS 476 Part 22
  • AS/NZ 1530 Part 4-2005
  • AS/NZ 3837:1998
  • AS 4964-2004
  • ISO 5660-1:2002
  • ISO 10140
  • ASTM E119-16a
  • ASTM E2768-11
  • ASTM E84-12a
  • ASTM E84-15b
  • ASTM C1185-08 (2012)
  • ASTM C1186-08 (2012)
  • ASTM C473-12
  • ASTM E386
  • ASTM E445
  • ASTM E72
  • ASTM D1037-12 Section 13
  • ASTM D1037-12 Section 15
  • ASTM D1037-12 Section 21
  • ASTM C518-10

 

The following is independent testing carried out on the ResCom® Non-Combustible Laminated Strip Flooring:

ResCom® Laminated Strip Flooring has undergone extensive testing to assure the products durability and performance:

Manufacturer’s warranty: 15 years

  • AC Level: AC3
  • LVT Series: Wearing layer 30um
  • Commercial performance: with Klumpp Coating

Independent Testing by SGS and Intertek Laboratories:

  • EN ISO 23999:2012 Dimensional Stability – Result length 0.10%, width 0.10%, curling 1.0mm
  • EN 438-2:2005 appearance – Result: no visible defects or other form of blemish evident within the decorative surfaces.
  • EN ISO 24345:2012 peal resistance – Result: MD: 80n/50mm CMD: 80n/50mm
  • NALFA LF 01-2011 section 3.9 caster chair resistance – Result: no visible damage after 25,000 cycles.
  • ASTM D 2047-2011 static coefficient measure by James machine – Result: dry 0.29, wet 0.66
  • ASTM D 3421-75 GC-MS analysis – Result: ND
  • ASTM F963-11 section 4.3.5.2(2)(b) – Result: ND
  • ASTM F925-13 resistance to chemicals – Result: 0
  • ASTM D3389-16 abrasion resistance – Result: MML 89.5mg
  • ASTM F970-15 static load – Result: applied load 250lb, residual indentation 0.05mm
  • ASTM E84-15a surface burning characteristics – Result: class A

Note: ResCom® Flooring is a Trademark product of Magnesium Oxide Board Corporation Pty Ltd of which Magnesium Oxide Board Corporation holds Patents of the formulation, structure and performances of the full range of ResCom® Building Products. The Patented ResCom® Core that delivers superior protection and performances against fire, mould, water and toxins carries with them registered Health Product Declarations (HPD’s). All information should be read in conjunction with ResCom® BP’s MSDS, Product Data, Storage and Handling and installation documentation.

For more information go to www.mgoboard.com.au or email admin@mgoboard.com.au

Upon request ResCom® Building Products test reports are available for review in our offices at 3 Allen Street Moffat Beach Queensland Australia.